Amino acids from ion-irradiated nitrile-containing ices

Solid CH(3)CN and solid H(2)O + CH(3)CN were ion irradiated near 10 K to initiate chemical reactions thought to occur in extraterrestrial ices. The infrared spectra of these samples after irradiation revealed the synthesis of new molecules. After the irradiated ices were warmed to remove volatiles, the resulting residual material was extracted and analyzed. Both unhydrolyzed and acid-hydrolyzed residues were examined by both liquid and gas chromatographic-mass spectral methods and found to contain a rich mixture of products. The unhydrolyzed samples showed HCN, NH(3), acetaldehyde (formed by reaction with background and atmospheric H(2)O), alkyamines, and numerous other compounds, but no amino acids. However, reaction products in hydrolyzed residues contained a suite of amino acids that included some found in carbonaceous chondrite meteorites. Equal amounts of D- and L-enantiomers were found for each chiral amino acid detected. Extensive use was made of (13)C-labeled CH(3)CN to confirm amino acid identifications and discriminate against possible terrestrial contaminants. The results reported here show that ices exposed to cosmic rays can yield products that, after hydrolysis, form a set of primary amino acids equal in richness to those made by other methods, such as photochemistry.     

Transport modeling of energetic electrons in the inner magnetosphere with synchrotron energy losses

The resulting L-distributions and energy spectra of energetic magnetospheric electrons obtained from numerical solution of the radiation belt transport equation with and without accounting for electron synchrotron energy losses are compared. It is demonstrated that synchrotron losses play an important role in formation of the space and energetic distributions of electrons in the inner magnetosphere.     

Influence of Body Waves,Instrumentation Resonances,and Prior Assumptions on Rayleigh Wave Ellipticity Inversion for Shallow Structure at the InSight Landing Site

Based on an updated model of the regolith’s elastic properties, we simulate the ambient vibrations background wavefield recorded by InSight’s Seismic Experiment for Interior Structure (SEIS) on Mars to characterise the influence of the regolith and invert SEIS data for shallow subsurface structure. By approximately scaling the synthetics based on seismic signals of a terrestrial dust devil, we find that the high-frequency atmospheric background wavefield should be above the self-noise of SEIS’s SP sensors, even if the signals are not produced within 100–200 m of the station. We compare horizontal-to-vertical spectral ratios and Rayleigh wave ellipticity curves for a surface-wave based simulation on the one hand with synthetics explicitly considering body waves on the other hand and do not find any striking differences. Inverting the data, we find that the results are insensitive to assumptions on density. By contrast, assumptions on the velocity range in the upper-most layer have a strong influence on the results also at larger depth. Wrong assumptions can lead to results far from the true model in this case. Additional information on the general shape of the curve, i.e. single or dual peak, could help to mitigate this effect, even if it cannot directly be included into the inversion. We find that the ellipticity curves can provide stronger constraints on the minimum thickness and velocity of the second layer of the model than on the maximum values. We also consider the effect of instrumentation resonances caused by the lander flexible modes, solar panels, and the SEIS levelling system. Both the levelling system resonances and the lander flexible modes occur at significantly higher frequencies than the expected structural response, i.e. above 35 Hz and 20 Hz, respectively. While the lander and solar panel resonances might be too weak in amplitude to be recorded by SEIS, the levelling system resonances will show up clearly in horizontal spectra, the H/V and ellipticity curves. They are not removed by trying to extract only Rayleigh-wave dominated parts of the data. However, they can be distinguished from any subsurface response by their exceptionally low damping ratios of 1% or less as determined by random decrement analysis. The same applies to lander-generated signals observed in actual data from a Moon analogue experiment, so we expect this analysis will be useful in identifying instrumentation resonances in SEIS data.     

Hermes: Learning from our mistakes

The paper draws conclusions from the course of the European Hermes program with the aim of identifying major programmatic, organisational and technical difficulties encountered and deriving consequences to avoid similar problems with comparable future projects. Points of interest are the basic objectives and underlying requirements and specifications, the structures implemented for the realisation and the technical philosophy of the specific solutions chosen. In all areas, severe obstacles were not detected in due time and subsequently caused complications in the course of the project. Since the majority of the deficiencies can be traced to a number of fundamental causes, a short synthesis of the important results and recommendations is presented for each of the above mentioned areas.     

Flexbus — an attractive technical solution for small missions

Responding to the demand for a ‘faster, cheaper, better’ implementation of space related services, Domier Satellitensysteme GmbH has established and exercised an approach for the development and production of satellites and the corresponding ground equipment for small missions, referred to as Flexbus. It allows to support space service customers starting from mission engineering via design, development and manufacturing of the necessary hardware, the launch service and ending with the hand-over of the operational system. Flexbus harmonises a modular component concept with a sound design and development approach, as a whole providing the means to offer high quality products in a fairly short time and for competitive pricing. This paper will outline the major features of the Flexbus approach and describe application examples.     

“Microquasars” and the X-ray background

The results of 1–20 μm infrared photometry of seven 3CR radio galaxies are discussed. The broad line galaxies all show steep infrared spectra with a power law index α −2.4 (F ∝ ν^+α) in direct continuation of the optical spectra. These spectra are far steeper than those observed in Seyfert 1 galaxies, the radio quiet counterparts of broad line radio galaxies. No infrared excesses were observed in narrow line radio galaxies. However, more sensitive observations are needed before any resemblance in the infrared between narrow line radio galaxies and Seyfert 2 galaxies can be excluded.     

The SOHO concept and its realisation

The Solar and Heliospheric Observatory (SOHO) — a space observatory to be placed, in 1995, 1.5 Gm sunward from the Earth in a halo orbit around the L1 Lagrange point — will investigate:

the solar corona, its heating and expansion into the solar wind, by both studying the radiation emerging from the outer solar atmosphere and in-situ solar wind measurements near 1 AU, and

the structure and dynamics of the solar interior by the method of helioseismology.

The science policy evolution leading to this comprehensive observatory concept is described. SOHO's link to the space-plasma-physics mission CLUSTER — devoted to the three-dimensional study of small structures in the magnetosphere — within the Solar Terrestrial Science Programme (STSP) and the embedding of STSP in the much larger International Solar Terrestrial Physics (ISTP) Programme are cited as well. The scientific subjects to be addressed by SOHO are introduced, and their current status assessed. Subsequently, the measurements required to advance these subjects are stated quantitatively and the payload, which will actually perform these measurements, is presented. The mission design, comprising spacecraft, orbit, operations and the data and ground systems are described. The special efforts made to obtain a reliable radiometric calibration of the instruments observing the Sun in the extreme-ultraviolet and to achieve a stable sensitivity through extreme cleanliness of spacecraft and instruments are emphasized and substantiated.     

The Ultraviolet Spectrograph on NASA’s Juno Mission

The ultraviolet spectrograph instrument on the Juno mission (Juno-UVS) is a long-slit imaging spectrograph designed to observe and characterize Jupiter’s far-ultraviolet (FUV) auroral emissions. These observations will be coordinated and correlated with those from Juno’s other remote sensing instruments and used to place in situ measurements made by Juno’s particles and fields instruments into a global context, relating the local data with events occurring in more distant regions of Jupiter’s magnetosphere. Juno-UVS is based on a series of imaging FUV spectrographs currently in flight—the two Alice instruments on the Rosetta and New Horizons missions, and the Lyman Alpha Mapping Project on the Lunar Reconnaissance Orbiter mission. However, Juno-UVS has several important modifications, including (1) a scan mirror (for targeting specific auroral features), (2) extensive shielding (for mitigation of electronics and data quality degradation by energetic particles), and (3) a cross delay line microchannel plate detector (for both faster photon counting and improved spatial resolution). This paper describes the science objectives, design, and initial performance of the Juno-UVS.     

Magnetic Fields in Astrophysical Jets: From Launch to Termination

Long-lived, stable jets are observed in a wide variety of systems, from protostars, through Galactic compact objects to active galactic nuclei (AGN). Magnetic fields play a central role in launching, accelerating, and collimating the jets through various media. The termination of jets in molecular clouds or the interstellar medium deposits enormous amounts of mechanical energy and momentum, and their interactions with the external medium, as well, in many cases, as the radiation processes by which they are observed, are intimately connected with the magnetic fields they carry. This review focuses on the properties and structures of magnetic fields in long-lived jets, from their launch from rotating magnetized young stars, black holes, and their accretion discs, to termination and beyond. We compare the results of theory, numerical simulations, and observations of these diverse systems and address similarities and differences between relativistic and non-relativistic jets in protostellar versus AGN systems. On the observational side, we focus primarily on jets driven by AGN because of the strong observational constraints on their magnetic field properties, and we discuss the links between the physics of these jets on all scales.